|
Collapsing
Resonator
-
Easy to
install & remove, without tools, in less than a minute !
Note : Many exciting custom
finishes are available to match your harp.
Step 1 : Flat as a
metallic blue Pancake
The resonator folds
flat (as shown) for safe & easy travel and storage.
Step 2 : Install the top post
Slide the short rubber-coated
rod thru the hole in the front panel and screw it into the threaded hole
on the back panel.
Step 3 : Install the bottom post
Position the metal tube over
the threaded hole, as shown, and insert the longer rubber-coated rod thru
the hole in the front and into the tube. Then screw the rod into the
threads.
It should look like this.
Step 4
: Screw in the bottom thumbscrew
It is easiest to do with the Harp upside-down and held
between your legs.
Step 5
: Screw in the top thumbscrew
Some mild finger-force may be needed to align the hole with the threads,
as shown by the right hand in this picture. This keeps the assembly
tight onto the harp.
After these 5 steps, you can
comfortably play your electric harp acoustically (unplugged) as a lap harp.
A standard guitar strap can be attached to the top thumbscrew (a washer
may be needed). Toss it over your right shoulder and then connect
the other end of the strap to the button in the front of the resonator, as
shown
email
ElectricHarp.com
or call Phil at 603-943-1320
|
ElectricHarp
Please feel free to contact us with your
requests, whether it's a for a pre-built instrument or just an idea for
your ideal harp that you're just thinking about. We can work
with you to create and ship the Harp of your Dreams.